Installer

Inverter

• I am unable to power on the Dura-I (No lights when Energising the Inverter). What should I do?
• How many CT clamps do I need to use?
• How many batteries can be paired with one Dura-i inverter?
• How do I register all the inverters in one parallel install on the Duracell Energy App?
• Is it possible to extend the CT clamps on the Dura-i?
• Which battery Comms cable is used for the Dura-i?
• How do I set up a scheduled charge on the Dura-i?
• What MC4 connectors should I use for the Dura-i?
• Which energy meter should I use for an AC-coupled setup?
• Where should I terminate the communications cable between the meter and the inverter in an AC-coupled setup?
• How can I identify the primary inverter when operating in parallel?
• What size breaker is recommended for the Dura i inverter?
• What parallel cable should I use between inverters? 
• Do both red DIP switches need to be on to enable parallel or just the primary?
• How do I turn OFF the system?
• Which pins are required in the RJ45 connector when extending the CT clamp?
• Why can’t I see my customers plant on the companies monitoring account?
• Where should the CT clamp be positioned?
• Is it possible to parallel two inverters on different phases?
• What are the best breakers to use for my client's storage system?

See less ▼

Battery

• Which battery do I select - Dura-i or Solis?
• Why is the battery not discharging to the house?
• How do I fix Can-Com/Bat-Com Alarm coming up on my Solis RAI inverter?
• How do I add additional storage
• What battery do you select on a Solis Inverter when using a Dura5 and Duracell 5+
• What Solis Inverter to battery comms cable should be used?
• What size earth cable is required for the system?
• What is the power on process for a Dura 5? 
• Which communication cable is used between the batteries?
• What app do I use to do the quick Dura 5 set up?

See less ▼

EV Charger

• Where do I find the PIN code for the EV manual?
• Can you extend the CT clamp for the DuraCharger?